Thursday, March 10, 2011

Paint it!

Tonight I had two projects, one was build a base for the vacuform machine and the other was painting of my masks.  I didn't think to take pictures of the vacuform base, but I did get a couple of pics of the mask.

I chose to paint the mask I got from Chaing Mai, Thailand.  There really isn't much to talk about other than I used regular acrylic paint and a light top coat of Design Master walnut wood toner.  It took two to three hours and was almost getting too cold to work, but I was too much in the "zone."

Here is the pic of the foam mask before it was painted as seen in my last post:


  Here is what the real mask looks like:


Here is a comparison of the real one, and the one I painted:


And here are two close ups of the paitned mask!




The biggest difference is that the original was gold leafed and I just had boring old paint, anyways, I'm pretty happy with how it turned out.

Wednesday, March 9, 2011

Vacuform Update!!

Since I introduced you all to my vacuform machine, I've made a couple improvements and tried out a couple other materials.  The first thing I did was finish off the arm that moves the plastic frame.  I came across this design on this page.  I used some scrap aluminum and hardware from my bulk of Ikea (as-is) junk.





Although it doesn't move as smooth and solid as I like, it works great from pulling the plastic down and the joints are spring loaded and hold the frame in any position.


I added a fiberglass/foil baffle to the bottom of the heater box to create a better seal around the frame.  This helps circulate the air and even out the heat.



After using the PETG, I tried some 1/16" styrene.



It appeared to work just as well as the PETG, however the result still wasn't ideal.  In order to improve this first added more holes to the vacuum table, made the holes a little bigger and modified the heating elements to be more even.  With all the modifications I still was not getting the results I desired, so I went out and got a more powerful shop vac.  I got a new more powerful shop vac.  However the results still didn't improve that much.

Despite not being able to get the great results I imagined, I moved on to having fun with the vacuform machine.  I chose to make a mask that would go along with some fake swat helmets I had from a short film in college.


The mask was not meant to be anything fancy, just a quick little project made from junk in my garage.  The mold was made from a metal bowl, and various plastic pieces hot glued to it.  Here it is:








My next project was to test out how well I could vacuform that foam sheet they sell at Michaels.  It turns out it works great!


I brought out some of my nicer masks (Chiang Mai Thailand on the left and Hawaii on the right) because I wasn't worried about the soft foam damaging them.



I was taking a chance with how close the Hawaiian mask was to the edge of the vacuform table.


However they pulled great and kept all the detail!







Overall I'm very happy with how the foam pulls, if anyone wants some replica masks, let me know!

That's it for now, I will continue to update my Vacuform projects as I get around to them.

Monday, March 7, 2011

Did I mention I like chairs.

This past weekend project was aging and industrializing some metal work stools I picked up from our employee store for five bucks a piece. 
Sure, they were already old and kind of industrial, but they just weren't vintage cool enough.  I wanted to make them look like something you would find at Restoration Hardware.  All it took was some sand paper, Design Master Walnut Wood Toner, faux leather vinyl, a towel and a sewing machine.

I first dismantled the chairs and began scuffing and sanding the painted metal.


After I scuffed the metal I sprayed on the wood toner and brushed and blotted it with a towel.

Here's the result:

Once the metal was taken care of I moved on to the upholstery.






With the old vinyl stripped off I made a pattern on to the new material.



I first tried adding the pipping like they previously had on the seat cushion but gave up after one try.  I ended up just sewing a normal seam.


Here is how it looked after it was stretched over and stapled on.


The head rest was a little easier to deal with.

Now that everything's done, here is the before and after:

Before:



After:

Did I mention it was a beautiful day to work outside?



Now if I only knew what to do with these stools!